Pating Tutorial Part 4: Immortal
Gauss Rods
This tutorial is very
simaliar to the Energy painting tutorial part 3 and for the black parts follow the tutorial for Black Parts that I will add soon . The Glowing Effect was added after the model
was finished and I will add that tutorial very soon. I undercoat all my models in Choas Black Spray
Paint and use all Citadel Paints. I think the Green that I used for the energy
and guass rods looks really good with the red that was used to paint the chest
and heads. I will aslo added another Gauss tutorial for the warriors and
anything else that is different as well as on for the telsa weapons.
Citadel Paints you will need:
Incubi Darkness, Kabalite Gren, Sybarite Green, Biel-Tan Green and White Scar.
Step 1: Paint a soild coat of
Incubi Darkness in all the groves and on the raise circles.
Step 2: Paint a soild coat of
Kabalite Green in all the groves and on the raise circles.
Step 3: Paint a soild coat of
Sybarite Green in all the groves and on the raise circles.
Step 4: Paint a wash in the grooves and on the
raised circles with Biel-Tan Green.
Step 5: Paint a soild coat of
Sybarite Green on all the raise circles.
Step 6: Mix 1 part Sybarite
Green and 1 part White Scar Paint and
paint a layer on all the raised circles but tryn and leave some of the Sybarite
Green Showing in different parts of the raised circles.
Step 7: Use White Scar and
paint a layer on all the raised circles mainly around the edges and a little in
the middle but make sure to leave a lot of the Mix and leave some of the Sybarite Green Showing in different parts of
the raised circles.
Grizwald
No comments:
Post a Comment